Première utilisation

Des tutoriels conçus pour les opérateurs pour une prise en main rapide de nos systèmes robotisés.

Get Started – Glossary

Get Started - Glossary1:25 minLa version française sera disponible prochainement. This document is the operator’s guide for the Robotic Fan Blade Reprofiling and Polishing System. Hereafter also referred to as the cell or system. The main purpose of this document is...

Get Started – Overview

Get Started - System Overview1:25 minLa version française sera disponible prochainement. Location of Main Components – Front View:   Location of Main Components – Rear View: Cell Contents:   LEGEND:     1. CAMERA * 7. STANDARD PROFILING # 2 13. PROFILOMETER...

Get Started – Status Light

Get Started - Status Light1 minLa version française sera disponible prochainement. Sequence Status Light A status light is installed on the top of the cell to indicate the different state of the system: Light Description GREEN Machine is running. GREEN AMBER Machine...

Get Started – System Safety

Get Started - System Safety3 minLa version française sera disponible prochainement. Safety Precautions Users of the system must read the operating manual carefully and be familiar with all stations and their features. Always apply the following precautions. If the...

Get Started – Lockout and Tag Out

Get Started - Lockout and Tag Out3 minLa version française sera disponible prochainement. The application of a lockout and tag out program is a method primarily used and recommended to protect workers from the risk of injury. Purpose A lockout/tag out program will...

Get Started – System Components

Get Started - System Components1 minLa version française sera disponible prochainement. Gripper Profiling Unit   Drawer   Profiling Tool Rack   Profilometre   Cord Length Sensor for Large Blades     Cord Length Sensor for Small Blades...

Get Started – System Setup

Get Started - System Setup5 minLa version française sera disponible prochainement. Gripper Fingers Replacement The following procedure explains the steps for replacing the robot's gripper fingers. It requires that a product has been successfully loaded and that there...

System Power Up and Shut Down

System Power Up and Shut Down2 minLa version française sera disponible prochainement. System Power Up 1. Close the electrical panel doors. 2. Turn ON the system's main switch by turning it 90° clockwise. 3. Turn ON the robot controller if its main switch is not...

Select A Product

Select a Product1:30 minLa version française sera disponible prochainement. 1. In Run (1) page, press Select product button (2).   2. A new window opens. Double-click on product to select (3) or press Select button (4). 3. A new window (5) will be displayed to...

Open, Close and Load Drawers

Open, Close and Load the Drawer 1:30 minLa version française sera disponible prochainement. Open and Close the Drawer 1. Select a product (see section 8.2).2. To open the drawer, press on the Open request button (1). 3. Open the drawer (or the door if it is the...

Starting and Stopping the Sequence

Starting and Stopping the Sequence1:30 minLa version française sera disponible prochainement. Starting the sequence 1. Load the drawer tray.2. Press the Start button (1). A new window opens.3. Choose which operation to run by checking or unchecking them in the list...

Open the Cell Door

Open the Cell Door 1 minLa version française sera disponible prochainement. The door will be unlocked when you press the Unlock doors button, even if the system is in alarm. The robot will move by itself to the Home position before unlocking the doors if it is not in...

Move the Robot

Move the Robot0:30 minLa version française sera disponible prochainement. 1. Select a product.2. In the Maintenance page (1), select the Robot tab (2). 3. In the Robot motion dock (3), select the position from the dropdown list and press the Move button (4).  

Pick and Drop a Part

Pick and Drop a Part0:30 minLa version française sera disponible prochainement. 1. Load parts.2. On the Maintenance page (1), select the Robot tab (2). 3. In the Part dock (3), select the place you want to pick or drop the part using the dropdown list (4), then press...

Reset a Tool’s Life

Reset a Tool's Life0:30 minLa version française sera disponible prochainement. Run Page 1. Load parts.2. Select the tool to be reset (1) and press Reset button (2) to reset its tool life to 100%. Maintenance Page 1. Load parts.2. On the Maintenance page (1), select...

Dress a Tool

Dress a Tool0:30 minLa version française sera disponible prochainement. 1. Select a product.2. In the Maintenance page (1), go to Tool maintenance tab (2). 3. Select the tool to be dressed (3) and press Dress button (4). If the tool has been changed, press the Reset...

Start Offline

Start Offline1 minLa version française sera disponible prochainement. 1. Select a product.2. In the batch selection dock, select Browse (1) from the dropdown list. 3. A new window opens. Open the batch’s folder and select the batch.xml file (2), the press Open button...

Alarm Recovery

Alarm Recovery2:30 minLa version française sera disponible prochainement. Alarm Acknowledgment 1. Deactivate the alarm condition by executing the appropriate action.2. Close the cell doors.3. Reset all E-Stops.4. If a door was open or if an E-Stop was triggered, press...

BrainWave System Log Files

BrainWave System Log Files1:30 minLa version française sera disponible prochainement. The system provides several logs to facilitate troubleshooting if necessary. These logs can be requested by AV&R Automation for support purposes. Follow the procedure below to...

Backup Procedures

Backup Procedures1:30 minLa version française sera disponible prochainement. Robot Backup “All of the Above” Backup This backup saves the files to a USB flash drive. It can be done either manually or automatically. To do so manually, follow these steps:1. Insert a USB...

Prêt à commencer?

AV&R Academy est réservé aux utilisateurs des solutions robotiques AV&R, qu’ils aient déjà acquis la solution ou qu’ils soient en voie de l’acquérir.

Pour vous inscrire, contactez-nous et nous vous créerons un compte.