Maintenance 101

Maintenance Schedule2 minLa version française sera disponible prochainement. Follow the recommended maintenance schedule to maintain system’s good performance and reduce the down times. Some system may not be equipped with all listed items. Item Procedure Every… Note...

Calibration Schedule1:30 minLa version française sera disponible prochainement. Element Frequency Duration Material required Tray - By AV&R at start-up- After mechanical reassembly of the   drawer(s) ≈15 min/tray - U-Sensor- Calibration tray Profiling wheel frame...

Advanced Calibration of System Components0:30 minLa version française sera disponible prochainement. Advanced calibration of system components may be necessary after replacement, maintenance of a component or for periodic inspection of the cell. This guide provides...

U-Sensor Installation and Calibration2:30 minLa version française sera disponible prochainement. The U-Sensor must be calibrated before being used to calibrate robot frames. 1. Ensure that the gripper is in the closed position.2. On the Learn or the Run page (1),...

Part Trays Calibration0:30 minLa version française sera disponible prochainement. NOTE: The U-Sensor must be installed and calibrated before beginning the parts tray calibration. 1. Install the calibration probe fixture (1) into appropriate drawer (2), as stated by...